Tracker Off-Road 800SX Service Manual page 64

MOD546
7. Remove the two cap screws securing the engine to
the transaxle. Account for the spacers and washers
between the engine and transaxle.
MOD543
MOD554
8. Remove the two cap screws securing the starter to
the engine backplate; then remove the starter; then
remove the two cap screws securing the driver-side
backplate to the front mount; then remove the four
cap screws for the engine backplate and remove the
engine backplate.
62
MOD563A
MOD544
MOD544A
9. Remove the air intake to the engine.
MOD545
10. With tape or other suitable means, plug the intake for
the engine to prevent foreign debris from entering.