Figure 22: Example Of A 10Gbps Stack Trunk For At-X550-18Xtq And At-X550-18Xsq Switches With Sp10 - Allied Telesis AT-x550-18XTQ Installation Manual


AT-x550-18XSQ Switch
SP10 Transceiver
AT-x550-18XTQ Switch
AT-x550-18XTQ Switch
SP10 Transceiver
AT-x550-18XSQ Switch
Figure 22. Example of a 10Gbps Stack Trunk for AT-x550-18XTQ and AT-
Building 10Gbps trunks for stacks that have both AT-x550-18XTQ
and AT-x550-18XSQ Switches requires the optional SP10
transceiver. It converts SFP+ transceiver slots into 100Mbps/
1Gbps/10Gbps RJ-45 twisted pair ports. You use the transceiver to
connect a 10Gbps stacking SFP+ transceiver slot in the AT-x550-
18XSQ Switch to a 10Gbps stacking port on the AT-x550-18XTQ
Switch. An example of a 10Gbps trunk for a stack with both
switches is shown in Figure 22.
x550-18XSQ Switches with SP10 Transceivers
x550 Series Installation Guide for Virtual Chassis Stacking
Twisted pair
cables
Fiber optic
transceivers
and cable
65