Table of Contents
Advertisement
Brief Introduction
The T3EL15030xP series Programmable DC Electronic Load has a 3.5 inch
TFT-LCD display, and comes with a simple, user-friendly interface and superb
performance specifications. The T3EL150302P comes with an input range of
150 V/30 A @ 200 W. The T3EL150303P comes with an input range of 150 V/30
A @ 300 W. The T3EL15030xP series has a measurement resolution of
1mV/mA. Adjustable current slew rate range is 0.001 A/μs-2.5 A/μs, and it
comes with built-in RS232/USB/LAN communication interfaces. Standard
SCPI communication protocol is used to establish an intelligent testing platform
for applications in various industries, such as the power industry, battery
industry, LED lighting, automotive electronics, and aerospace.
•
T3EL150302P (Single channel): DC 150 V/30 A, total power up to 200 W
•
T3EL150303P (Single channel): DC 150 V/30 A, total power up to 300 W
•
4 Static modes / Dynamic mode: CC/CV/CR/CP
•
CC Dynamic modes, continuous, pulsed, toggled
•
CC Dynamic mode: 25 KHz, CP Dynamic mode: 12.5 KHz, CV Dynamic
mode: 0.5 Hz
•
Adjustable current slew rate range 0.001 A/us-2.5 A/us
•
Min read-back resolution: 0.1 mV, 0.1 mA
•
Measuring speed of voltage and current: up to 500 KHz
•
Over current protection test, Over power protection test, Battery test,
short circuit and CR-LED test functions
•
4-wire SENSE compensation mode function
•
External voltage and current control function
•
Voltage, Current monitoring via 0-10V
•
3.5 inch TFT-LCD display, capable of displaying multiple parameters and
states simultaneously
•
With memory function in case of power-down
•
OCP, OVP, OPP, OTP and LRV protection
•
Graphical display of the waveform
•
Von and Vlatch functions
•
Smart fan control
•
Remote control and measurements via PC
4
Advertisement
Table of Contents
