Sdo Abort Codes; Table 188: Sdo Abort Codes - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-354/000-001 EtherCAT® Fieldbus Coupler, ID Switch
Table 187: AL Status Codes
AL Status Code Meaning
0x9004
13.3

SDO Abort Codes

Table 188: SDO Abort Codes

SDO Abort
Code
0x05030000
0x05040001
0x05040005
0x06010000
0x06010001
0x06010002
0x06010004
0x06020000
0x06070010
0x06090011
0x06090030
0x06090031
0x06090032
0x08000000
0x08000020
Internal error.
 Contact technical support
so that a firmware update can be implemented.
Meaning
Toggle bit did not toggle
Invalid or unknown command
Not enough memory
Not supported access to an object.
(e.g. complete access to a subindex greater than 1)
Attempt to read a write-only object
Attempt to write a read-only object
SDO Complete access not supported for objects of variable
length such as ENUM object types
Object does not exist
Length of transmitted data is incompatible with object or
subindex
Subindex does not exist
Value range of parameter exceeded (only for write access)
Value to be written is too large.
Value of parameter written too low
General error
The data to be read/written can not be retrieved by the
application and/or transmitted to the application.
(e.g. writing a command object while this is still engaged in the
implementation of the last order)
Appendix 209
Manual
Version 1.2.1