Analog Output Modules; Channel Analog Output Modules; 750-354/000-001 Ethercat® Fieldbus Coupler, Id Switch; Table 147: 2 Channel Analog Output Modules - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-354/000-001 EtherCAT® Fieldbus Coupler, ID Switch
11.2.4

Analog Output Modules

The hardware of an analog output module has 16 bits of measured analog data
per channel. The 16 bits of analog data per channel are grouped as words and
mapped in Intel format in the Output Process Image of the EtherCAT
coupler.
Information on the structure of control and status bytes
For detailed information on the structure of a particular I/O module's
control/status bytes, please refer to that module's manual. Manuals for each
module can be found on the Internet at www.wago.com.
11.2.4.1

2 Channel Analog Output Modules

750-550, -552, -554, -556, -560, -562, 563, -585, -586, (and all variations),
753-550, -552, -554, -556

Table 147: 2 Channel Analog Output Modules

Output Process Image
Offset
0
1
11.2.4.2 4 Channel Analog Output Modules
750-553, -555, -557, -559,
753-553, -555, -557, -559

Table 148: 4 Channel Analog Output Modules

Output Process Image
Offset
0
1
2
3
Byte Destination
High Byte
D1
D3
Byte Destination
High Byte
D1
D3
D5
D7
Low Byte
D0 Output Value Channel 1
D2 Output Value Channel 2
Low Byte
D0 Output Value Channel 1
D2 Output Value Channel 2
D4 Output Value Channel 3
D6 Output Value Channel 4
I/O Modules 169

fieldbus
Description
Description
Manual
Version 1.2.1