Rebuilt-Exchange Assemblies; Ordering Information - Agilent Technologies 8719ET Service Manual

Replaceable Parts

Rebuilt-Exchange Assemblies

Rebuilt-Exchange Assemblies
Under the rebuilt-exchange assembly program, certain factory-repaired and tested
modules (assemblies) are available on a trade-in basis. These assemblies are offered for
lower cost than a new assembly, but meet all factory specifications required of a new
assembly.
The defective assembly must be returned for credit under the terms of the
rebuilt-exchange assembly program. Any spare assembly stock desired should be ordered
using the new assembly part number.
procedure.

Ordering Information

To order a part listed in the replaceable parts lists, quote the Agilent Technologies part
number, indicate the quantity required, and address the order to the nearest Agilent
Technologies office. The sales or service offices table is located in
Regulatory Information."
To order a part that is not listed in the replaceable parts lists, include the instrument
model number, complete instrument serial number, the description and function of the
part, and the number of parts required. Address the order to the nearest Agilent
Technologies office.
13-4
Figure 13-1 illustrates the module exchange
8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
Chapter 15 , "Safety and
Service Guide