Service Key Menus and Error Messages
Firmware Revision Softkey
Firmware Revision Softkey
Press
SYSTEM
SERVICE MENU
firmware revision information. The number and implementation date appear in the active
entry area of the display as shown in
installed options are also displayed. Another way to display the firmware revision
information is to cycle the line power.
Figure 10-9 Location of Firmware Revision Information on Display
10-30
FIRMWARE REVISION
Figure
10-9. The analyzer's serial number and
8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
to display the current
Service Guide