Agilent Technologies 8719ET Service Manual page 40

System Verification and Performance Tests
System Verification
Required Equipment and Accessories
The following equipment and accessories are required to verify the network analyzer
system. (For information on compatible printers, refer to the user's guide).
• HP Printer
• Centronics or GPIB Interface Cable
• Verification Kit
• Calibration Kit
• RF Cable Set
Analyzer warmup time: 30 minutes
Table 2-1 8719ET/ES and 8720ET/ES Supported System Configurations
Description
Calibration Kit 85052B/C/D
Verification Kit 85053B
Cables 85131C/D/E/F
Table 2-2 8722ET/ES Supported System Configurations
Description
Calibration Kit
Verification Kit
Cables
2-18
3.5 mm 7 mm
85050B/C/D
85051B
85132C/D/E/F
2.4 mm
85056A/D
85057B
85133C/D/E/F
8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
Type-N
85054B/D
85055A
85131C/D/E/F 3.5 mm85130C
(3.5 mm to Type-N adaptor set)
3.5 mm
85052B/C/D
85053B
85131C/D/E/F
Service Guide