Measure The Post Regulator (A8) Voltages - Agilent Technologies 8719ET Service Manual

8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers

Measure the Post Regulator (A8) Voltages

Measure the DC voltages on the test points of A8 with a voltmeter. Refer to
test point locations, and
Figure 5-3 Post Regulator (A8) Test Point Locations
Table 5-1 Post Regulator (A8) Test Point Voltages
TP Supply
1 +65 V (Not Used)
2 AGND
3 +5 VD
4 SDIS
−15 V
5
−12.6 PP (Not Used)
6
7 +15 V
8 +5 VU
−5.2 V
9
10 +22V
11 +6 V
Service Guide
Table 5-1 for supply voltages and limits.
Range
+64.6 to +65.4
n/a
+4.9 to +5.3
n/a
−14.4 to −15.6
−12.1 to −12.8
+14.5 to +15.5
+5.05 to +5.35
−5.0 to −5.4
+21.3 to +22.7
+5.8 to +6.2
Power Supply Troubleshooting
Start Here
Figure 5-3 for
5- 7