Peek/Poke Menu - Agilent Technologies 8719ET Service Manual

8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers

PEEK/POKE Menu

To access this menu, press
PEEK/POKE
CAUTION The PEEK/POKE capability is intended for service use only.
PEEK/POKE ADDRESS
(PEEL[D])
(PEEK)
PEEK
(POKE[D])
POKE
RESET MEMORY
Service Guide
SYSTEM SERVICE MENU
Allows you to edit the content of one or more memory
addresses. The keys are described below.
accesses any memory address and shows it in the active
entry area of the display. Use the front panel knob, entry
keys, or step keys to enter the memory address of interest.
Displays the data at the accessed memory address.
allows you to change the data at the memory address
accessed by the
front panel knob, entry keys, or step keys to change the
data. The A7CC jumper must be in the "ALT" position in
order to poke.
Resets or clears the memory where instrument states are
stored. To do this, press
Service Key Menus and Error Messages
PEEK/POKE
PEEK/POKE ADDRESS
RESET MEMORY
PEEK/POKE Menu
.
softkey. Use the
.
Preset
10- 29