Agilent Technologies 8719ET Service Manual page 106

Adjustments and Correction Constants
EEPROM Backup Disk Procedure
4. Press
FILE UTILITIES
and the
SELECT LETTER
"FILE00" TO "N12345" where 12345 represents the last 5 digits of the instrument's
serial number. (The first character in the filename must be a letter). When you are
finished renaming the file, press
5. Write the following information on the disk label:
• analyzer serial number
• date backup was made
• "EEPROM Backup Disk"
In Case of Difficulty
• Insert another disk in to the analyzer disk drive and press
• The analyzer should display a catalog of the disk contents. If the catalog does not
appear, refer to Chapter 6 , "Digital Control Troubleshooting,"
Agilent Technologies sales or service office.
3-34
RENAME FILE ERASE TITLE
softkey (or an external keyboard) to rename the file
.
DONE
8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
. Use the front panel knob
.
Save/Recall
or contact the nearest
Service Guide