Agilent Technologies 8719ET Service Manual page 279

8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
11.IF (IF used for phase lock)
Counter ON: analog bus Reading: 10 MHz
This node displays the IF frequency (see
assembly via the A7 ALC assembly. This signal comes from the R sampler output and is
used to phase lock the source.
Figure 10-6 Location of Internal Counter Reading on Display
Service Guide
Service Key Menus and Error Messages
Figure 10-6) as it enters the A11 phase lock
Analog Bus on OFF
10- 25