Ventilation Phase - Siare Morpheus ND User Manual

5.10 Ventilation phase

•
•
•
•
•
•
•
5-50
Based on the ventilation parameters set by the User and on the patient's
characteristics, the anaesthesia unit is able to monitor and measure a series of
values necessary for the patient's clinical evaluation.
On the top of the screen, there is a led indicator that displays the pressure
inside the airways in real time. The measured and monitored values (right side
of the screen) are updated after each breath of the patient.
On the left side of the display you can find PRP parameters.
In the main section you can see the Charts showing the trend of the respiratory
parameters.
On the right side of the display you can find monitored values that will help you
evaluate the patient's clinical condition.
In the upper part the Operative Mode is displayed as well as both AUT, MAN
and Stand-BY (STBY) controls for the ventilation and the message for active
alarms.
At the bottom, the functions to be activated by the user as well as time and
status of the power supply are available.
•
Operative mode selected: VC-VAC.
•
Select AUT ( or MAN ) to begin the
ventilation in the selected mode
with the most suitable PRP for the
clinical situation of the patient.
User manual, DU33ND101