CAUTION
GAS ANALYZER - Zeroing
•
•
4.3.8 Data Connection (Trend and Events downloading )
•
Connect a USB drive to a USB0 socket for
CPU programming ( USB near the reset
button ).
•
Connect a USB drive to a USB1 socket for
Trend and Events data downloading ( see
picture ).
Trend and Events downloading
A dedicated software permits the download and the analysis of the data stored in the
Morpheus_ND anaesthesia unit ( for more details, please see on chapter 5.13.4 ).
4-12
Mainstream IRMA sensor
on, it is necessary to perform the manual procedure of Zero Calibration.
With sidestream ISA sensor
activated in automatic mode; anyway it is possible to perform the Zeroing
calibration procedure when needed ( the green led blinks when you turn-on the
GAS ANALYZER ).
:
after around one minute from the device is turned
:
the zeroing of gas sensor measurement is
User manual, DU33ND101