3.2
Anaesthesia unit switching ON
Morpheus_ND
Before switching on the Morpheus_ND anesthesia unit, all the devices and
accessories necessary for the operation of the anesthesia unit must be present and
correctly connected: electric power and gas supplies connected, patient circuit,
lung simulator, etcc...
•
Insert the plug of the power supply
cable to the wall socket.
•
Connect the power supply cable to
the anaesthesia unit.
•
Set the main switch (placed on the
back side of the anaesthesia unit)
to " I ".
•
Make sure that on the unit
keyboard, the green led is lit: that
indicates the presence of mains
power supply ( ON ).
•
Hold the STANDBY ON-OFF key
for few seconds.
•
The unit switch ON and the
automatic Self Test phase starts.
•
Please close the patient circuit.
3-5