Morpheus_Nd Use - Siare Morpheus ND User Manual

5

MORPHEUS_ND USE

This chapter shows you how to use the Morpheus_ND anaesthesia unit. Thoroughly read this
chapter and the entire manual to make sure respiratory parameters and alarm limits are set correctly
and choose the most suitable ventilation mode. The User must choose the Operative modes and the
alarm limits that best match patient's physiological state and pathologies.
The correct setting of respiratory parameters and alarms limits, as well as the
selection of most suitable ventilation modality are not described in the manual.
CAUTION
The choice of the operation modalities and alarm limits most suitable for the
physiological conditions and pathologies of the patient under anaesthesia, it will be
up to the User.
WARNING !! Risk for Patient / User injury
For the safety of users and patients, before making operative the Unit, the User
should have performed a series of checks and inspections.
•
•
•
•
•
CAUTION
Before subjecting the patient to a ventilation treatment, please:
•
•
•
The breathing parameters and the alarms must be always set even when the use of
a spontaneous ventilations is required; in case of patient's apnoea, the anaesthesia
unit will be immediately available for correct ventilation.
Morpheus_ND
Carry out the preliminary checks ( please see chapter 6 )
Prepare the flowmeter for operation
Set the language and the Patient Data
Check and set the Alarms Limits ( please see chapter 5 )
Set the physiological respiratory parameters and the operative mode that best
matches the patient's clinical situation.
set the airway pressure limit alarm to a value that does not exceed 30 cmH
this way you will prevent any problems that might arise due to incorrect
respiratory volume or frequency setup (you can increase the pressure if the
patient's pathology and conditions require such modification)
check the set oxygen concentration (FiO
the patient's health
please consult this User Manual.
) as high concentrations might affect
2
O;
2
5-1