5.12.1 Calibration Programs displaying
Morpheus_ND
•
Set the main switch (placed on the
side back of anaesthesia unit) in
position " I " (ON).
•
Make sure that on the keyboard
(user commands area) the green
led (indicating the presence of
mains power supply) is ON.
•
In sequence, keep pressed for a
ALARM RESET
few seconds the
ON-OFF soft keys
and
ON
the anaesthesia unit.
The list of the procedures available is
displayed in the 'Calibration Programs
page'
Select :
•
Self Test
, to switch to the normal
operation of the anaesthesia unit.
•
Power Off,
to switch OFF the
anaesthesia unit.
to switch
5-59