3.3.4
PATIENT DATA
CAUTION - Anaesthesia unit switched ON.
At the end of Self-Test phase, the system does not switch directly to Stand-by
operative mode, but it previously displays a page which allows the adjustment of the
following type of PATIENT informations and anaesthesia unit SETUP.
•
•
Morpheus_ND
PATIENT DATA
SETUP parameters ( please see on 3.2.5 )
Alongside the operative command
PATIENT TYPE
icons, the
specified (Adult, Child, New Born).
In this way the default respiratory
parameters are set automatically
(breathing parameters and alarms
limits).
The PATIENT DATA displaying allows
to set the following data.
•
Patient type
•
Male / Female
•
Name / Surname
•
Physical data of the patient
•
Birthday
•
Note
set is
3-17