Administration Of Fresh Gas In The "To And Fro" System - Siare Morpheus ND User Manual

5.1.2 Administration of fresh gas in the "TO and FRO" system

In order to deliver the fresh gas flow to the TO and FRO system it is necessary to perform the
following operations:
•
Anaesthesia unit in Stand-by mode.
•
TO and FRO patient circuit connected to the AUX connector ( if the
connector is positioned on the back side of the anaesthesia unit).
•
Check if the flowmeter is correctly set.
•
Press the MAN key to enabling MANUAL operative mode.
•
Press the AUX key to enabling of fresh gas outlet connector (AUX).
WARNING !! Risk for Patient injury
In order to deliver the fresh gas flow into the valves group (breathing system) press
the APL key on the work shelf.
Otherwise, pressing the AUX key the fresh gas will go onto the TO and FRO.
5-4
User manual, DU33ND101