Section 8
Packing
Instrument Packed
Abbott VP 2000™ Processor Service Manual
30-608308/R1—September 2008
1. Place the unit onto the shipping container base.
2. Place the Vessel Carrier with cover on the unit.
3. Slide the shipping container sleeve into position.
4. Insert hoods into the hood cartons.
5. Wrap slide basket, basket tool, interface cable and power
cable and insert them in one of the hood cartons.
6. Install the lid and strap or tie container together.
Hoods and Instrument Packed
Figure 8.1: Instrument and Hood Packing Box
Packing
Hood Packed
8-9