Abbott VP 2000 Service Manual page 108

Maintenance and Diagnostic Procedures
5-18
10. Turn power OFF on the instrument. Remove the
instrument from the power source.
11. Install the Top Cover, carefully ensuring that all wiring
and cables are clear of the cover. Install the six (6) 6-32 x
1/4 Phillips-Head screws, three (3) on each side.
12. Install the Hoods on both sides of the instrument. Made
sure that they are installed on the correct sides.
Section 5
Abbott VP 2000™ Processor Service Manual
30-608308/R1—September 2008