Abbott VP 2000 Service Manual page 10

Introduction
x
Operators exposed to biohazardous or potentially infectious
materials should take steps immediately to cleanse the affected
area, as follows:
• Eyes—rinse with water for 15 minutes.
• Mouth—rinse with water.
• Skin—wash the affected area with soap and water.
• Puncture wound—allow to bleed freely. Wash the
affected area with soap and water.
• In all cases, seek medical attention immediately.
CAUTION: Personal Injury Risk. Take care to avoid
injury when using sharp tools.
• Do not direct tool points, such as the blade of a
screw driver, toward the face, body, or hands.
• If cutting of tubing, etc., is required, NEVER cut in
the direction of the face, body, or hands.
Chemical Hazards
Operators may be exposed to hazardous chemicals when
handling reagents, calibrators, controls, or bulk solutions.
Exposure to hazardous chemicals is minimized by following
the instructions provided in the assay-specific package inserts
and product-specific Material Safety Data Sheets (MSDS).
Exposure levels are further reduced by the "hands-off" design
features of the instrument when it is used properly.
In general, observe the following precautions when handling
chemicals:
• Consult Material Safety Data Sheets for safe use
instructions and precautions.
• Avoid contact with skin and eyes. If contact with material
is anticipated, wear impervious gloves and protective
eyewear and clothing.
• Always maintain good housekeeping. Do not eat, drink, or
store food and beverages in areas where chemicals are
used.
• If irritation or signs of toxicity occur after exposure, seek
medical attention.
Abbott VP 2000™ Procesor Service Manual
30-608308/R1—September 2008