Tools And Equipment Required - Abbott VP 2000 Service Manual

Section 7

Tools and Equipment Required

Abbott VP 2000™ Processor Service Manual
30-608308/R1—September 2008
The following tools will be sufficient for most repair and
replacement operations required for the Abbott VP 2000
Processor:
• Phillips-Head Screw Driver, No. 1
• Phillips-Head Screw Driver, No. 2
• Phillips-Head Screw Driver with Gripper, 6 in. Shank, No.
2
• Nut Driver, 1/4 in. (Red)
• Nut Driver, 5/16 in. (Yellow)
• Allen Wrench, 0.050 Hex
• Allen Wrench, 7/64 Hex
• Allen Wrench, 3/16 Hex
• Cutter, Flexible Tubing
• Wrench, Open End, 1/4 in.
• Wrench, Open End, 3/8 in.
Tools and Equipment Required
7-7