Target Groups; Field Service Engineers; Qualification, Training - Abbott VP 2000 Service Manual

About This Manual

Target Groups

Field Service Engineers

Qualification, Training

1-6
This manual addresses one target group: FSEs who have access
to most implemented functions.
Some functions are only accessible to Abbott production and
developers.
Functions intended only for FSEs are protected by password.
The terms "Field Service Engineer" and "FSE" always refer to
an Abbott-authorized Field Service Engineer. The FSE is
responsible for initiating operation of the instrument and
performing repairs and periodic maintenance.
Initiating instrument operation includes the first mechanical
installation, installation of instrument software, initial setup,
and startup.
Service includes maintenance procedures or installation of
additional optional hardware modules. If additional hardware
modules are installed, appropriate software must also be
installed. Upon completion, operation of the instrument can
be resumed.
In the event of system problems, contact Abbott Molecular
GSS.
An FSE must have attended an Abbott VP 2000 Processor
Service Training course. Installation, servicing, and repair of an
instrument should only be performed by Abbott-authorized
service personnel.
The FSE must be qualified to operate a PC and be familiar with
basic operation of the Windows operating systems.
Section 1
Abbott VP 2000™ Processor Service Manual
30-608308/R1—September 2008