Installing The Firmware Upgrade Utility; Upgrading The Firmware - Christie GS Series Service Manual

3. If using Windows 7, run as administrator.

Installing the firmware upgrade utility

To update the firmware on your projector, install the firmware update utility on your PC.
1. Download the latest firmware program file from the Christie website (www.christiedigital.com).
2. Unzip the file to the desktop and open the folder created.
3. Execute Wizard OPFU.EXE.

Upgrading the firmware

Examples shown in the instructions may have minor differences compared to the firmware update for
your specific projector model. Where applicable, these instructions note important differences
between models.
To complete the firmware upgrade process, complete the following steps.
1. Double-click Wizard OPFU.EXE.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
Firmware
41