Backing Up, Restoring, And Upgrading Projector Files; Adding An Upgrade File; Removing An Upgrade File; Installing An Upgrade File - Christie CP2208 User Manual

Backing up, restoring,
and upgrading projector
files
Learn how to manage projector files.

Adding an upgrade file

You can add an upgrade file to the projector.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or
service permissions.
2. Select Menu > Administrator Setup > Upgrade.
3. Select Upload.
4. In the Drive Letter list, select the location of the upgrade file.
5. In the Folder list, browse to the location of the upgrade file.
6. Select the upgrade file and then tap Open.

Removing an upgrade file

You can remove an upgrade file if it is not required.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or
service permissions.
2. Select Menu > Administrator Setup > Upgrade.
3. In the Available Upgrade Files list, select an upgrade file.
4. Select Remove.

Installing an upgrade file

Complete the following procedure to install an upgrade file.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or
service permissions.
2. Select Menu > Administrator Setup > Upgrade.
3. In the Available Upgrade Files list, select an upgrade file.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
63