Comparing Upgrade Packages; Installing An Upgrade Package; Deleting An Upgrade Package; Restoring Factory Default Settings - Christie CP2309-RGB User Manual

Comparing upgrade packages

Compare upgrade packages to view the differences between them.
1. In the left navigation menu, select Service Setup > System Upgrade.
2. In the list of packages, select an upgrade package.
The differences between the current and the selected upgrade package are displayed in the
right pane. Differences are identified with a yellow exclamation mark.

Installing an upgrade package

Install an upgrade package to update the projector software.
1. In the left navigation menu, tap Service Setup > System Upgrade.
2. In the list of packages, tap an upgrade package.
3. In the right pane, select one of these options:
• Upgrade Differences Only—Upgrades system components that are newer or older than
the currently installed version.
• Force Upgrade All—Upgrades all components in the upgrade package.
• Factory Upgrade—Removes all existing configurations and upgrades all components.
4. Tap Upgrade.
5. To confirm, tap Upgrade.

Deleting an upgrade package

Delete an upgrade package that is no longer required.
1. In the left navigation menu, tap Service Setup > System Upgrade.
2. In the list of packages, tap an upgrade package.
3. Tap Delete.
4. To confirm the deletion, tap Delete.

Restoring factory default settings

Restoring factory settings removes all custom projector settings.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Select Factory Restore.
3. Select the settings you want to restore and select Restore.
4. Select OK.
CP2309-RGB User Guide
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Backing up, restoring, and upgrading files
88