Table of Contents
Advertisement
Firmware
DHD410S projector uses web user interface to upgrade the system firmware. Use this chapter for
the firmware upgrade processes.
System requirements
Below are the minimum system requirements for the firmware upgrade.
Minimum system requirements
Hardware
Software
To upgrade the firmware on your projector, download the latest firmware program file from the
Christie Digital Systems USA Inc. website at www.christiedigital.com.
System firmware upgrade
To update the firmware on your projector, you must first install "dotNetFX40_Full_X86_X64 Microsoft.NET
Framework 4.0 Microsoft Corporation" Program in your PC.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
• Projector
• Power cord, provided with the projector and appropriately rated for your region
• RJ45 cable (CAT-5e) or wireless dongle
• PC or Laptop with Windows 32bits
• Mini USB Cable: 42.00284G001 (USB A to mini USB B cable)
• VGA Cable (42.87305G102)
• HDMI(M) to DVI(F) cable (42.00256G001)
• Power Adapter (Output DC 12V)
• Power Cord for Projector (42.53506G002)
• RS-232 9 Pin Cable (pin to pin, F-M) (42.83C07G001)
• Generic Fixture (80.00001G001) for EDID Key-in (Fixture: JP3 must be closed)
• DDP 442X Firmware Downloader.exe
• ActionsMpUpdate_v1.14.exe
• NuvolSP.exe
• All models_EDID Tool_Ver.0.81
• Operating system
• Windows 7
26
Advertisement
Table of Contents
