Application Examples; Input/Output Interconnections For A Safety Switching Device With Tm54F - Siemens SINAMICS G130 Manual

Application examples

9.1 Input/output interconnections for a safety switching device with
TM54F
TM54F: interconnecting F-DO with safe input on safety switching device
Note
These typical circuit diagrams are only valid for version B of TM54F devices.
Figure 9-1
The external pull-up resistor is only required in exceptional cases, see below.
Safety Integrated
Function Manual, 05/2010, A5E03264275A
TM54F F-DO at equivalent/antivalent safe input on safety switching device
(e.g. safety PLC)
9
241