Safety Licenses For S120 Cabinet Modules And S150; Option K01 To K05 (Safety Licenses For 1 To 5 Axes) - Siemens SINAMICS G130 Manual

Licenses
The required licenses can optionally be ordered with the CompactFlash Card.
Retroactive licensing is executed on the Internet via the "WEB License Manager" by
generating a license key:
http://www.siemens.com/automation/license
Note
The process for generating a license key is described in detail in the SINAMICS S120
Function Manual, chapter, "Fundamentals of the drive system" under, "Licensing.
Activation
The associated license key is entered in parameter p9920 in ASCII code. The license key is
activated using parameter p9921 = 1.
Diagnosis
An insufficient license is indicated via the following alarm and LED:
● Warning A13000 → License not sufficient
● LED READY → Flashes green/red at 0.5 Hz
6.2.2

Safety licenses for S120 Cabinet Modules and S150

6.2.2.1

Option K01 to K05 (safety licenses for 1 to 5 axes)

The Safety Integrated basic functions are unlicensed. A license is, however, required for
each axis with safety functions in the case of Safety Integrated Extended Functions. In this
regard it is irrelevant which safety functions are used and how many.
The option K01 stands for 1 axis, option K02 stands for 2 axes, etc. to option K05 for 5 axes.
● K01: Safety license for 1 axis
● K02: Safety license for 2 axes
● K03: Safety license for 3 axes
● K04: Safety license for 4 axes
● K05: Safety license for 5 axes
Note
Currently on a Control Unit CU320-2, a max. of 5 safety axes with Safety Integrated
Extended Functions are possible.
Safety Integrated
Function Manual, 05/2010, A5E03264275A
Safety Integrated Extended Functions
6.2 Safety licenses for 1 to 5 axes
79