Certification - Siemens SINAMICS G130 Manual

System Features

3.2 Certification

7. Open the subject area "Safety Engineering - Safety Integrated".
8. At the very least, register for the newsletters for the following product areas:
3.2 Certification
The safety functions of the SINAMICS drive system meet the following requirements:
● Category 3 to EN ISO 13849-1.
● Performance Level (PL) d to EN ISO 13849-1.
● Safety integrity level 2 (SIL 2) to IEC 61508.
In addition, most of the SINAMICS safety functions have been certified by independent
institutes. An up-to-date list of certified components is available on request from your local
Siemens office.
44
You will now be shown which newsletter is available for this particular subject area or
topic. You can subscribe to the corresponding newsletter by clicking on the box. If you
require more detailed information on the newsletters then please click on this box. A
small supplementary window is opened from which you can take the appropriate
information.
– Safety Integrated for SIMOTION
– Drives
Safety Integrated
Function Manual, 05/2010, A5E03264275A