Recording And Playing; Recording Doorphone Images; Playing Recorded Images (Main Monitor And Extension Monitor) - Panasonic VL-MWD275 Operating Instructions Manual

5. Recording and playing

5.1 Recording doorphone images

The main monitor and extension monitor can record
doorphone images (still images). They can save images
from up to 50 doorphone calls or monitoring sessions.
Each time new images are recorded, they are saved in
an image set of up to 4 images.
Note:
R Sub monitors can manually record images while
monitoring (page 18).
5.1.1 Recording automatically (recording a
received call; main monitor and extension
monitor only)
When a visitor calls you, the main monitor and extension
monitor record 4 images automatically (whether you
answer the call or not). Recording starts about 2 seconds
after you receive the call.
When you do not answer a call
The recorded images are saved as unplayed images,
and the play lamp lights.
When there are multiple doorphones
R When you are talking or monitoring and there is an
incoming call from another doorphone, images from
the incoming call will not be displayed and recorded.
In order to display and record incoming calls, you
must end the current call or stop monitoring.
R If there is an incoming call from another doorphone
while receiving an incoming call, the number of
recorded images from the 1st caller (4 images) are
reduced.
When the memory is full (auto image updating)
When the memory is full, new images overwrite the
oldest images automatically. This occurs even if the
oldest images are unplayed images.
5.1.2 Recording manually (recording while
monitoring)
The main monitor, extension monitor, and sub monitor
can manually record images while monitoring.
R Main monitor/extension monitor:
While monitoring, press
be recorded.
– is displayed on the screen when
recording.
R Sub monitor:
While monitoring, press
"Record" ®
recorded.
– is displayed on the screen when
recording.
18
. Up to 4 images will
® select
. Up to 4 images will be
5.2 Playing recorded images
(main monitor and extension
monitor)
When there are new (i.e., unplayed) images recorded,
the play lamp (page 10) lights.
Note:
R Images manually recorded by the main monitor and
extension monitor can only be played by the device
that recorded the images.
1
Press M N.
R "Recorded image list" screen is displayed.
2
Select "Unplayed images" (for new images) or
"Played images" (for images that have been
played) ®
.
R The most recent image set of the selected type is
displayed.
3
Browse the image sets and images.
R The following operations are available when
browsing images.
R See page 19 for a list of all available operations.
Plays back all images in an
image set continuously
Browses image sets, from older
ones to newer ones
Browses image sets, from
newer ones to older ones
Displays the options menu
Returns to the previous screen
4
When finished, press M
Note:
R The play lamp turns off when the unplayed image is
displayed.
5.2.1 Image playing screen
Main monitor image playing screen
A
1 1
B
C
[4] 22 December 2020 9:18
Device number
Image position within a image set
Image set number
N.
D
E