Calling An Elevator; Setting Security To Alert Mode - Panasonic VG-M186D Operation Manual

Calling an Elevator

This function is displayed only when the Indoor Master is linked to the elevator system.
68
1
Touch the Elevator Button on the Top
Menu.
2
<Elevator Operating>
● "Calling now" will be displayed by the Elevator
Button. The elevator will be called and a voice
message saying that the elevator is being
called will come from the Indoor Master
<Elevator Maintenance>
● "Maint." will be displayed by the Elevator
Button and a "bu bu" sound will come from the
Indoor Master speakers.

Setting Security to Alert Mode

Setting the Windows (Security Sensor 1) to Alert Mode
Setting the Front Door (Security Sensor 2) to Alert Mode
Canceling the Alert Mode for Security Using the Security Number
Canceling the Alert Mode for the Windows (Security Sensor 1)
(One-touch Cancellation)
1 Touch the Window (Security 1)
Button on the Top Menu.
● The window icon will change to an "Armed"
icon, the window security alert indicator will
light, and security 1 will be set to Alert Mode.
(Refer to Security Sensor Operates on page
39.)
1 Touch the F-door (Security 2) Button
on the Top Menu.
●The F-door Icon will change to "Armed," the
foyer security alert indicator will light, and
security 2 will be set to the Alert Mode. (Refer
to Security Sensor Operates on page 39.)
Touch the Away Button in Away Mode. The Cancel
1
Display will appear.
Touch the security number and then
the OK Button.
● The Alert Mode for security will be cleared.
Touch the TOP MENU Button to return to the
●
Top Menu.
* If you make a mistake, touch the Button.
Clear
* This display will not appear unless a Security
number has been previously set.
1 Touch the Window Button or the F-door
Button in the Top Menu.
● The security alert indicator will turn OFF, and the
Alert Mode will be canceled.
69