Unlocking With Qrcode; Description Of The Parameter Setting - Panasonic VL-VC3900BX Operation Instruction Manual

9. Unlocking with QRCode

Click on the " " button on the lobby station panel to enter the
identification interface, start the mobile APP to the function of ope-
ning the door with the QR code and scan the dynamic QR code in
front of the lobby station lens to open the door, then the lobby sta-
tion gives a voice prompt "The door has been opened".

10. Description of The Parameter Setting

Method for entering the parameter setting
Press the「 *90*password
meter setting menu. The default password is 123456.
1. Access card management
Access card management interface includes access control
configuration, QR code and other items.
Access
The user can choose to unlock with the password or
control
QR code
config
Registration：Enter the QR code interface → edit the
unit number and the apartment number(four digits
respectively) → press the down key to the registration
bar→ input the ID number of the QR code on the mo-
bile APP in the input bar of the registration interface
QR code
and press the # key to complete the registration.
Cancellation：Enter the Two-dimensional code iden-
tification interface → edit the unit number and the
apartment number(four digits respectively) → press
the down key→ confirm the cancellation so that the
cancellation is successful.
2.Network
In this function, the user can view and edit the lobby station IP
address, subnet mask and gateway, and view the lobby station
MAC address.
」button to enter the para-
11
3.Address
In this function, the user can view and edit the lobby station
number, guard station number, property center number and
lobby station type.
4.Version
In this function, the user can view the software version, hard-
ware version, kernel version and MCU version of the equipment.
5.Time limit
In this function, the user can view and edit the lock time, open-
ing time(s), time-limited service starting time and time-limited
service ending time.
6.Dail
In this function, the user can view and set the number of dialing
digits of the lobby station within1-8 digits.
7.Volume
In this function, the user can adjust the ringing volume, speech
volume and prompt volume of the lobby station, a total of five-
position adjustable; at the same time, you can select one of Ring1
~Ring5 as a ring tone.
8.Elevator control (Option)
In this function, the user can set the parameters related to the
elevator calling function, including the lobby station floor and the
elevator controller address.
9.Date and time
The user can set the date and time or choose to automatically
obtain the time of the property center.
10. Screen Saver
The user can set the time for the lobby station to enter the scr-
een saver, as well as the screen saver mode.
12