Installation Diagram; Technical Parameters; Function Characteristics; Production Introductions - Panasonic VL-VC3500BX Operation Instruction Manual

5. Installation Diagram

Trepanning a hole(large than the embedded box size and no more
than the equipment size: 168*93mm).
Insert the embedded box in the hole, and fix it with the cement slu-
rry.
Connect wires, fix the outdoor station on the pre-embedded box
and locked it with M3 screws, then install finished.
CAUTION
・The door station shall not be installed in the sun exposure, rain,
high temperature, snow/frost， too much dust or strong magnetic
field environment.
・The door station camera shall avoid direct sunlight to prevent
poor image quality.
・When the door station is installed, it is recommended that the
camera be about 145cm from the ground.
・The lighting at night shall be taken into account during the install-
ation of the door station.
・The door station shall not be installed in the place where the back-
ground noise is more than 70dB.

6. Technical Parameters

Parameters
External dimensions
Embedding box dimensions
Weight :
Operation voltage
Maximum power consumption
Static power consumption
Operating temperature
IP Grade

7. Function Characteristics

・It is made of cast aluminum material/tempered glass and has
anti-explosion and waterproof function.
・It has the night light capturing function, video image processing
function and better intercom quality.
・Support the equipment displacement alarm.
・Support power distributor.

8. Production Introductions

8.1 Outdoor Unit Calls Indoor Unit
The visitor directly presses the call button on the villa door station
to call the corresponding room monitor, for video intercom, unlock-
ing and other operations. When the room monitor implements the
unlocking operation, the door station will give a beep sound which
means opened.
9 10
Value
93 x 163 x 82
75 x 150 x 50
0.35 kg
12 - 27VDC
≤6W
≤3W
-40℃ - 70℃
IP54