Table of Contents
Advertisement
the batteries in order to maintain battery
performance and prevent the batteries from
discharging.
– Recharge the batteries before using the sub
monitor again.
Wall mounting
Note:
R Make sure that the wall and the fixing method are
strong enough to support the weight of the unit.
R Drive the screws (locally procured) into the wall.
Registering the product to the
Video Intercom System
The operations described here are based on the VL-
SWD275 series main monitor. See the Operating
Instructions of the Video Intercom System for more
information.
When registering the product to a main monitor of a
different series, follow the instructions in the
documentation included with your main monitor.
1
Main monitor:
Press M
N → select "Register/Cancel" →
.
2
Select "Register" →
R When you are prompted to register your main
monitor, select "Main monitor" →
3
Select "Sub monitor" →
4
Select the registration number of the sub monitor to
be registered →
R Complete the following operations within about 2
minutes.
5
Sub monitor:
R To register a sub monitor for the first time:
When "Please register the device." is
displayed on the screen, select
.
– "Registering completed" is displayed.
R To re-register a sub monitor:
→ select "Register" →
Press
→
– "Registering completed" is displayed.
6
25 mm
.
.
.
→
.
6
Main monitor:
Press M
N.
Cleaning
Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a cloth slightly
dampened with fresh water.
Cleaning the charger:
For safety, disconnect the charger from the power
supply before cleaning.
Cleaning the sub monitor:
To avoid mistakenly operating the sub monitor, remove
its batteries before cleaning.
Specifications
Main body
Power source
Dimensions
(mm) (height ×
width × depth)
Mass (weight)
Operating
environment
Display
Frequency
range
RF transmission
.
power
Talking method
Operating time
Charging time
Transmitting
range
*1 When used fully charged in an operating
temperature of 20 °C.
*2 When the operating temperature is 20 °C. The
charging time may increase when the operating
temperature is lower than this.
*3 When registered to the main monitor.
Rechargeable battery AAA
(R03) Ni-MH battery (1.2 V,
550 mA) × 2
Approx. 173×52×30
(excluding protruding sections)
Approx. 160 g (including the
batteries)
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity (non-
condensing): up to 90 %
Approx. 5.6 cm (2.2 inches,
colour display)
1.88 GHz to 1.90 GHz
Approx. 10 mW (average power
per channel)
250 mW (max.)
Hands-free
Standby use: approx. 80 hours
*1
*2
*3
Approx. 8 hours
Approx. 100 m (line-of-sight
distance from the main monitor)
Hide quick links:
Advertisement
Table of Contents
