Navigating The Web User Interface - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Menu > Advanced (default password: admin) > Network > Web Server > HTTPS Status
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTPS
Status
Parameter static.network.port.https
It configures the port used to access the web user interface of the phone over a secure tunnel
Description
(HTTPS).
Permitted
Integer from 1 to 65535
Values
Default 443
Web UI Network > Advanced > Web Server > HTTPS Port (1~65535)
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Web Server > HTTPS Port
Phone UI
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTPS
Port
Parameter static.wui.default_https_enable
It enables or disables to access the web user interface of the phone over a secure tunnel (HTTPS) by
default.
Description
Note: It works only if "static.wui.https_enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default
1
Supported
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Devices
[1]
If you change this parameter, the phone will reboot to make the change take effect.

Navigating the Web User Interface

When you log into the web user interface successfully, the device status is displayed on the first page of the web
user interface. You can click the navigation bar to customize or click Log Out/Logout to log out of the web user inter-
face.
The following figure is an example when you navigate to Settings > Preference:
81
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg