Dect Intercom; Dect Intercom Configuration - Yealink SIP-T5 Series Administrator's Manual

use the PIN configured by "base.pin_code" to access some features.
Default
0
Parameter base.pin_code_for_register
It configures the PIN for registering or de-registering a handset.
Description
Note: It works only if "base.double_pin_code.enable" is set to 1 (Enabled).
Permitted
Integer from 0000 to 9999
Values
Default
0000

DECT Intercom

Intercom is a useful feature in an office environment to quickly connect with the operator or the secretary. Users can
make internal intercom calls and external intercom calls on the handset. Internal intercom calls are made among
handsets registered to the same phone.
The handset can automatically answer an incoming external intercom call and play warning tone.
Topic

DECT Intercom Configuration

DECT Intercom Configuration
The following table lists the parameters you can use to configure DECT intercom.
Parameter custom.handset.auto_intercom
Description It enables or disables the auto intercom feature on the handset.
-1-Do not modify the configuration.
0-Off, auto intercom feature is disabled. Users need to answer incoming internal intercom calls manu-
ally.
Permitted
1-On(Beep Off), the phone/handset answers an incoming internal intercom call automatically without
Values
a warning tone.
2-On(Beep On), the phone/handset answers an incoming internal intercom call automatically and
plays a warning tone. It works when the silence mode is off.
Default -1
Handset UI OK > Settings > Telephony > Auto Intercom
T57W/T54W:
Menu > DECT Settings > Auto Intercom > Auto Intercom
Phone UI
T53W/T53:
Menu > Settings > DECT Settings > Auto Intercom > Auto Intercom
Parameter features.intercom.headset_prior.enable
It configures the channel mode when an incoming intercom call is automatically answered.
Note: It works only if "custom.handset.auto_intercom" is set to 1 or 2. For the phone, the headset
Description
mode should be activated for use; for the handset registered to the phone, the headset should be con-
nected in advance.
Permitted
0-Speaker Mode
Using Handsets with T57W/T54W/T53W/T53 Phones
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
133