Vq-Rtcpxr Display Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

VQ-RTCPXR Display Configuration

The following table lists the parameters you can use to configure VQ-RTCPXR display.
Parameter phone_setting.vq_rtcpxr.states_show_on_web.enable
It enables or disables the voice quality data of the last call to be displayed on the web interface at
Description
the path Status > RTP Status.
Permitted 0-Disabled
1-Enabled
Values
Default 0
Web UI Settings > Voice Monitoring > Display Report Options on Web
Parameter
phone_setting.vq_rtcpxr.states_show_on_gui.enable
It enables or disables the voice quality data of the last call or current call to be displayed on the
phone screen. You can view the voice quality data of the last call on the phone at the path Menu >
Description
Status > More > RTP (RTP Status). You can view the voice quality data of the current call by press-
ing RTP/RTP Status soft key during a call.
Permitted 0-Disabled
1-Enabled
Values
Default 0
Web UI Settings > Voice Monitoring > Display Report Options on Phone
Parameter phone_setting.vq_rtcpxr_display_start_time.enable
It enables or disables the phone to display Start Time on the phone screen.
Description
Note: It works only if "phone_setting.vq_rtcpxr.states_show_on_gui.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default 1
Web UI Settings > Voice Monitoring > Report Options on Phone > Start Time
Parameter phone_setting.vq_rtcpxr_display_stop_time.enable
It enables or disables the phone to display Current Time or Stop Time on the phone screen.
Description
Note: It works only if "phone_setting.vq_rtcpxr.states_show_on_gui.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default
1
Web UI Settings > Voice Monitoring > Report Options on Phone > Current Time
Parameter
phone_setting.vq_rtcpxr_display_local_call_id.enable
It enables or disables the phone to display Local User on the phone screen.
Description
Note: It works only if "phone_setting.vq_rtcpxr.states_show_on_gui.enable" is set to 1 (Enabled).
Permitted
0-Disabled
Values 1-Enabled
Default 1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Local User
187
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg