Web Server Type Configuration - Yealink SIP-T5 Series Administrator's Manual

phone.
If it is set to "any", you can use IP address or any domain name to access the web user interface of the
phone.
Default any

Web Server Type Configuration

Yealink phones support both HTTP and HTTPS protocols for accessing the web user interface. You can configure
the web server type. Web server type determines the access protocol of the web user interface. If you disable to
access the web user interface using the HTTP/HTTPS protocol, both you and the user cannot access the web user
interface.
The following table lists the parameters you can use to configure the web server type.
Parameter static.wui.http_enable
Description It enables or disables to access the web user interface of the phone over a non-secure tunnel (HTTP).
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Network > Advanced > Web Server > HTTP
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Web Server > HTTP Status
Phone UI
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTP
Status
Parameter static.network.port.http
It configures the port used to access the web user interface of the phone over a non-secure tunnel
Description
(HTTP).
Permitted
Integer from 1 to 65535
Values
Default 80
Web UI Network > Advanced > Web Server > HTTP Port (1~65535)
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Web Server > HTTP Port
Phone UI
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTP
Port
Parameter static.wui.https_enable
Description It enables or disables to access the web user interface of the phone over a secure tunnel (HTTPS).
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Network > Advanced > Web Server > HTTPS
Phone UI Color Screen Phones:
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Provisioning
80