Programmable Keys Configuration - Yealink SIP-T5 Series Administrator's Manual

Hide thumbs Also See for SIP-T5 Series:

Table of Contents

Programmable Keys Configuration

For T23P/T23G/T21(P) E2 phones, Cancel key can be configured only when "features.keep_mute.enable" is set to

0 (Disabled).

For other phones, Mute key can be configured only when "features.keep_mute.enable" is set to 0 (Disabled).

The following table lists the parameters you can use to configure programmable keys.

Parameter programablekey.type_range.custom

It configures the list for available programmable key types when configuring programmable keys.

To assign function types, specify programmable key type IDs which start with or without a symbol "+".

For example, "+2,15,16,7,4" or "2,15,16,7,4" means only "N/A", "Forward", "Line", "BLF", "Recall",

"Hold" types are available when you configure programmable keys.

To remove a function type, specify programmable key type IDs which start with the symbol "-". For

example, "-14, 5, 2" means to remove "Intercom", "DND", "Forward" types from the Dsskey function

types list. These programmable key types are not available when you configure programmable keys.

Note: Multiple programmable key type IDs are separated by commas. "N/A" type is always kept.

T23P/T23G/T2-

T53W/T53/T43U/

T42G/T42S/T42-

<y0000000000xx>.cfg

Phone Customization

T54W/T48U/T48G/

T48S/T46U/T46S/T46-