Ignoring Incoming Calls Configuration; Off Hook Answering; Off Hook Answering Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
When the phone receives an incoming call in the call state, the screen does not prompt the incoming call inform-
ation. You can perform other features on the current call. You can only answer the incoming call after ending the cur-
rent call.
Topic

Ignoring Incoming Calls Configuration

Ignoring Incoming Calls Configuration
The following table lists the parameter you can use to configure ignoring incoming calls.
Parameter features.ignore_incoming_call.enable
Description It enables or disables the phone to ignore the incoming call.
0-Disabled
Permitted
1-Enabled, the incoming call is still in the progress and is not rejected, the user can choose to answer
Values
it or not, or perform other features.
Default 0

Off Hook Answering

You can set whether to answer an incoming call by picking up the handset, pressing the Speakerphone key or
pressing the HEADSET key directly.
It is not applicable to CP920 phones.
Topic

Off Hook Answering Configuration

Off Hook Answering Configuration
The following table lists the parameter you can use to configure off hook answering.
Parameter features.off_hook_answer.enable
It enables or disables the phone to answer an incoming call by picking up the handset, pressing the
Description
Speakerphone key or pressing the HEADSET key directly.
0-Disabled, the user needs to press the corresponding line key, the Answer soft key or the OK key to
Permitted
answer an incoming call after picking up the handset, pressing the Speakerphone key or pressing the
Values
HEADSET key.
1-Enabled
379
<y0000000000xx>.cfg
<y0000000000xx>.cfg