Vq-Rtcpxr Display - Yealink SIP-T5 Series Administrator's Manual

the central report collector. When the MOS-LQ value computed by the phone is greater than 2.8, the
phone will not send a critical alert quality report to the central report collector.
If it is set to blank, critical alerts are not generated due to MOS-LQ.
Permitted
Integer from 15 to 40
Values
Default Blank
Web UI Settings > Voice Monitoring > Critical Threshold for Moslq
phone_setting.vq_rtcpxr_delay_threshold_warn-
Parameter
ing
It configures the threshold value of one-way delay (in milliseconds) that causes the phone to send a
warning alert quality report to the central report collector.
For example, if it is set to 500, when the value of one way delay computed by the phone is greater
than or equal to 500, the phone will send a warning alert quality report to the central report collector;
Description
when the value of one way delay computed by the phone is less than 500, the phone will not send a
warning alert quality report to the central report collector.
If it is set to blank, warning alerts are not generated due to one-way delay. The one-way delay
includes both network delay and end system delay.
Permitted
10 to 2000
Values
Default
Blank
Web UI Settings > Voice Monitoring > Warning Threshold for Delay
Parameter phone_setting.vq_rtcpxr_delay_threshold_critical <y0000000000xx>.cfg
It configures the threshold value of one-way delay (in milliseconds) that causes the phone to send a
critical alert quality report to the central report collector.
For example, if it is set to 500, when the value of one-way delay computed by the phone is greater
than or equal to 500, the phone will send a critical alert quality report to the central report collector;
Description
when the value of one way delay computed by the phone is less than 500, the phone will not send a
critical alert quality report to the central report collector.
If it is set to blank, critical alerts are not generated due to one-way delay. The one-way delay includes
both network delay and end system delay.
Permitted
10 to 2000
Values
Default Blank
Web UI Settings > Voice Monitoring > Critical Threshold for Delay

VQ-RTCPXR Display

You can check the voice quality data of the last call via the web user interface or phone user interface. You can also
specify the options of the RTP status to be displayed on the phone user interface. Options of the RTP status dis-
played on the web user interface cannot be specified.
Note : You can configure the softkey layout feature to display the
RTP Status
press the soft key to check the voice quality data with different parties. For more information, refer to
Layout
.
Topic
VQ-RTCPXR Display Configuration
<y0000000000xx>.cfg
RTP Status soft key during the conference. Then you can
Audio Features
Softkey
186