Yealink SIP-T5 Series Administrator's Manual page 517

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Description It enables or disables the hoteling feature.
0-Disabled
Permitted
1-Enabled, users can use any available host (shared) phone by logging in with user credentials. After
Values
logging in, users have access to their own guest profile on the host phone.
Default 0
Parameter account.X.hoteling.user_id
Description It configures the user ID used to log into the guest profile.
Permitted
String within 99 characters
Values
Default
Blank
Parameter account.X.hoteling.password
Description It configures the password used to log into the guest profile.
Permitted
String within 99 characters
Values
Default Blank
Parameter features.homescreen_softkey.hoteling.enable
It enables or disables the phone to display the Hoteling soft keys such as GuestIn or GuestOut on the
idle screen.
Description
Note: It works only if "account.X.hoteling.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default 1
Parameter hoteling.authentication_mode
It configures the XML browser hoteling authentication mode.
Description
Note: It works only if "account.X.hoteling.enable" is set to 1 (Enabled).
0-The phone uses the hoteling user ID and password as authentication credentials.
Permitted
1-The phone uses the provisioning user name and password as authentication credentials, and at the
Values
same time provides the hoteling user ID and password in the payload of the message for authen-
tication credentials.
Default 0
Parameter account.X.hoteling.expires
Description It configures the hoteling subscription expiration time (in seconds).
Permitted
Integer from 30 to 2147483647
Values
Default 3600
Parameter account.X.hoteling.auto_login_enable
It enables or disables the phone to save login credentials automatically when logging into the guest
Description
profile.
Permitted
0-Disabled
1-Enabled
Values
514
[1]
<MAC>.cfg
[1]
<MAC>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg