Display Method On Dialing - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Note: This parameter also affects the history records display.
0-Names matched to the entries in the following phone directories are displayed preferentially, the pri-
ority is as follows: Local Directory > Remote Phone Book > Broadsoft Network Directory > BroadCloud
Permitted
Buddies > LDAP Directory > Network signaling.
Values
1-Names provided through network signaling are displayed preferentially.
Default 0
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter phone_setting.incoming_call.horizontal_roll_interval
It configures the interval (in milliseconds) for the phone to horizontally scroll the caller information
Description
when the phone is ringing.
Permitted
Integer from 100 to 2000
Values
Default 500
Supported
All phones except CP920
Devices
Parameter account.X.update_ack_while_dialing
Description It enables or disables the phone to update the display of call ID according to the ACK message.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Parameter account.X.refresh_remote_id.enable
It enables or disables the phone to update the identity of the caller according to the request message
Description
from the remote party.
Permitted
0-Disabled
Values 1-Enabled
Default 1
Parameter sip.disp_incall_to_info
It enables or disables the phone to display the identity contained in the To field of the INVITE message
Description
when it receives an incoming call.
Permitted
0-Disabled
Values 1-Enabled
Default 0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.

Display Method on Dialing

When the phone is on the pre-dialing or dialing screen, the account information will be displayed on the phone
screen.
232
[1]
[1]
[2]
<y0000000000xx>.cfg
<MAC>.cfg
<MAC>.cfg
<y0000000000xx>.cfg