Ringer Device Configuration; Audio Volume; Ringer Volume Configuration - Yealink SIP-T5 Series Administrator's Manual

Topic

Ringer Device Configuration

Ringer Device Configuration
The following table lists the parameters you can use to configure the ringer device.
Parameter features.ringer_device.is_use_headset
It configures the ringer device for the phone.
Description
Note: To use speaker, make sure "features.speaker_mode.enable" is set to 1 (Enabled). To use the
headset, make sure "features.headset_mode.enable" is set to 1 (Enabled).
0-Use Speaker
Permitted
1-Use Headset
Values
2-Use Headset & Speaker
Default 0
Supported
All phones except CP920
Devices
Web UI Features > Audio > Ringer Device for Headset

Audio Volume

You can configure the sending volume and ringer volume for the phone.
Topics

Ringer Volume Configuration

Sending Volume Configuration
Ringer Volume Configuration
You can configure the ringer volume as a fixed level, so the user cannot adjust the ringer volume on the phone.
This feature is used to avoid missing calls when the user turns down the ringer volume.
The following table lists the parameters you can use to configure the ringer volume.
Parameter force.voice.ring_vol
Description It configures the ring tone as a fixed volume.
Blank-the user can adjust the ringer volume on the phone.
Permitted
Values
0 to 15-the user cannot adjust the ringer volume on the phone, the ring tone is the configured volume.
Default
Blank
Parameter phone_setting.voice.ring_vol_min
It configures the adjustable minimum ringer volume on the phone.
Description
Note: It only takes effect on the ringer volume of the speaker on the phone. After the headset is con-
nected, the ringer volume can only be controlled by the headset itself.
Permitted
Integer from 0 to 15
Values
Default 0
Supported
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Devices
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Audio Features
156