Example: Adding Replace Rules Using A Replace Rule File - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Parameter dialplan.block_out.number.X
It configures the block out numbers.
Example:
dialplan.block_out.number.1 = 4321
Description
When you dial the number "4321" on your phone, the dialing will fail and the phone screen will
prompt "Forbidden Number".
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
String within 32 characters
Values
Default Blank
Settings > Dial Plan > Block Out > BlockOut NumberX
Web UI
Parameter dialplan.block_out.line_id.X
It configures the desired line to apply the block out rule. The digit 0 stands for all lines. If it is left blank,
the block out rule will apply to all lines on the IP phone.
Description
Note: Multiple line IDs are separated by commas. It works only if "dialplan.digitmap.enable" and
"account.X.dialplan.digitmap.enable" are set to 0 (Disabled).
0 to 16 (for T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G)
0 to 12 (for T53W/T53/T43U/T42U/T42S/T42G)
0 to 6 (for T41P/T41S/T27G)
Permitted
Values
0 to 3 (for T40P/T40G/T23P/T23G)
0 to 2 (for T21(P) E2)
0, 1 (for CP920)
Default Blank
Supported
All phones except T19(P) E2
Devices
Web UI Settings > Dial Plan > Block Out > Account
[1]
X is from 1 to 10.

Example: Adding Replace Rules Using a Replace Rule File

The following example shows the configuration for adding replace rules.
Customize the replace rule template file and place this file to the provisioning server "http://192.168.10.25".
Example
dialplan_replace_rule.url = http://192.168.10.25/DialPlan.xml
After provisioning, the rules defined in this file are added to the IP phone, and you can use the replace rules on the
phone.
357
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
[1]