Audio Features; Alert Tone; Alert Tone Configuration - Yealink SIP-T5 Series Administrator's Manual

Audio Features

This chapter describes the audio sound quality features and options you can configure for the IP phone.
Topics

Alert Tone

Touch Tone
Ring Tones
Distinctive Ring Tones
Ringer Device
Audio Volume
Tones
Audio Codecs
Packetization Time (PTime)
Early Media
Headset Prior
Dual Headset
Acoustic Clarity Technology
DTMF
Voice Quality Monitoring (VQM)
Alert Tone
You can configure the following audio alert for the phone:
Redial tone: allow the phones to continue to play the dial tone after inputting the preset numbers on the dialing
l
screen.
Voice mail tone: allow the IP phone to play a warning tone when receiving a new voice mail. You can customize
l
the warning tone or select specialized tone sets (vary from country to country) for your IP phone.
Send tone: allow the IP phone to play a key tone when you press the send key. It works only if the key tone is
l
enabled.
Dial tone: allow the IP phone to play a specific dial tone for a specified time.
l
Key tone: allow the IP phone to play a key tone when you press any key.
l
Topic

Alert Tone Configuration

Alert Tone Configuration
The following table lists the parameters you can use to configure the alert tone.
Parameter features.redial_tone
It configures that after you enter a specific number on the dialing screen, the phone will replay the dial
tone.
Example:
Description
features.redial_tone = 123
The phone will continue to play the dial tone after entering "123" on the dialing screen.
Permitted
Integer within 6 digits
Values
Default Blank
Web UI Features > Audio > Redial Tone
<y0000000000xx>.cfg
Audio Features
146