Phone User Interface; Web User Interface - Yealink SIP-T42S User Manual

User Guide for the SIP-T42S IP Phone
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, it is possible to use either the phone user interface and/or the web user interface
interchangeably. However, in some cases, it is only possible to use one or the other interface to
operate the phone and change settings.

Phone User Interface

You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced Settings option is only accessible to the administrator, and the default
administrator password is "admin" (case-sensitive). For more information on customizing your
phone with the available options from the phone user interface, refer to
Phone on page 33.
For a better understanding of the menu structure, please refer to
Note
on page 187.

Web User Interface

In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of your
new phone. To obtain the IP address, press the OK key on the phone when the phone is idle.
Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10 for IPv4;
http://[2005:1:1:1:215:65ff:fe64:6e0a] or [2005:1:1:1:215:65ff:fe64:6e0a] for IPv6) in the address
bar of a web browser on your PC. The default administrator user name and password are both
"admin" (case-sensitive).
The access to the Advanced settings of the Account or Network via web user interface may be
Note
blocked by the web browser (e.g., Chrome, Firebox) if you have installed "Adblock Plus plugin".
The options you can use to customize the IP phone via phone user interface and/or via web user
interface are listed in the following table:
Status
--IPv4
--MAC
--Firmware
--Network
--Phone
--Accounts
Basic Phone Settings
--Power Saving
8
Options
Appendix B – Menu Structure
Phone User Interface
√
x
Customizing Your
Web User Interface
√
√