User Interfaces; Phone User Interface; Web User Interface - Yealink SIP-T27G User Manual

https://arttel.ru/
User Guide for the SIP-T27G IP Phone
Note

User Interfaces

Phone User Interface

Note

Web User Interface

8
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
LED Status
Slow-flashing green (for local
BLA phone)
Slow-flashing red (for
monitoring BLA phone)
The above introduces the default LED status. The statuses of the power indicator LED and BLF key
LED are configurable via web user interface. You can also customize the BLF key LED status and
BLF key behavior. For more information, contact your system administrator.
Two ways to customize configurations of your SIP-T27G IP phone:
The user interface on the IP phone.

The user interface in a web browser on your PC.

The hardware components keypad and LCD screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, it is possible to use either the phone user interface and/or the web user interface
interchangeably. However, in some cases, it is only possible to use one or the other interface to
operate the phone and change settings.
You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced Settings option is only accessible to the administrator, and the default
administrator password is "admin" (case-sensitive). For more information on customizing your
phone with the available options from the phone user interface, refer to
Phone on page 35.
For a better understanding of the menu structure, please refer to
on page 209.
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of your
new phone. To obtain the IP address, press the OK key on the phone when the phone is idle.
Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10 for IPv4;
http://[2005:1:1:1:215:65ff:fe64:6e0a] or [2005:1:1:1:215:65ff:fe64:6e0a] for IPv6) in the address
Description
The bridged line conversation is placed on hold.
Appendix B – Menu Structure
Customizing Your